Nitrox/Oxygen Analyzer
The Rubber Duckie Designs Nitrox/Oxygen Analyzer has a
number of great features:
- Water/Splash Resistant (no analyzer is water proof, in spite of
what some salesman might tell you).
- Easier to use and calibrate than most competitors' oxygen
analyzers due to the calibration circuit design.
- Analyzer has backlight feature. 3 Position power switch:
Up is On; Middle position is Off ; and Down position is On with
Backlight.
- BC flowrate adapter plugs into standard low pressure inflator BC
fitting. This makes it very easy to get a stable flowrate of gas to
your oxygen analyzer (this is the preferred/most accurate method of
calibrating and sampling). The BC sample adapter and 2 feet of
3/16" clear tubing is included with the purchase of every Nitrox/Oxygen
analyzer.
- Can be used to sample directly from a SCUBA tank.
Crack the valve on tank to establish a small flowrate, press the analyzer up to tank to
sample (calibrated orifice controls rate at which gas enters sample section).
Works with both Yoke and DIN style tank valves.
- Easy to surface mount. Analyzer Enclosure has mounting holes
that are outside of the gasket seal. Mounting hole spacing is also
indicated on the back of the enclosure in both inches and centimeters.
- Available in both Right and Left handed versions. Left Handed
version swaps the position of the on/off switch and the
calibration knob, making it much easier for the left handed to use. Showing the south paws some respect...
- 4-5 year expected lifespan of sensor. Sensor has two year
warranty. Lower overall cost of ownership.
- 2 year limited warranty against workmanship and material defects.
- Includes Battery. Oxygen Analyzer ships fully assembled and ready
to use.
Proudly made in the USA.
|
Sampling with BC Sample Adapter
|
|
Sampling Directly From Tank
 |
BC Sample Adapter showing flowrate
(2.7 LPM @ 140 psi
intermediate pressure)
|
|
Analyzer with Backlight (Switch in Down Position)
 |
Left and Right Handed Versions:
Analyzer comes with BC Sample
Adapter and 2 feet of
3/16" tubing.
 |
|
Mounting Holes on Back of Enclosure
 |
Might we also suggest a short hose
scuba regulator to mount at your fill station or keep with your oxygen analyzer.
Here are simple instructions for how to take an old scuba regulator and make a
very useful time saving device.
Scuba Regulator for Oxygen
Analyzer
Download the
Nitrox/Oxygen
Analyzer Instructions.
DEMA
SPECIAL:
The Rubber Duckie Designs Oxygen
analyzer is available for purchase for $350. Shipping anywhere within the United States
costs an additional $15. For shipping to other countries, please send us
an email with your address and we will provide you a quote for the most cost
effective shipping method (usually this is US Postal Service).
Call Derek at (808) 392-8252 or email at
Derek@RubberDuckieDesigns.com for more information.
|
 |
Quick, safe and secure transactions using PayPal. All
items are shipped via US Postal Service. |
|
 |
Right Handed Version
Left Handed Version
|
External Sensor Type Nitrox/Oxygen Analyzer
We also carry a Nitrox/Oxygen analyzer with an external Oxygen Sensor.
Perfect for use with your Nitrox Stik.
- Water/Splash Resistant (no analyzer is water proof, in spite of
what some salesman might tell you).
- Easier to use and calibrate than most competitors' oxygen
analyzers due to the calibration circuit design.
- Analyzer has backlight feature. 3 Position power switch:
Up is On; Middle position is Off ; and Down position is On with
Backlight.
- High quality shielded/armored cable with screw-on connection to oxygen
sensor. Sensor cable will not inadvertently come loose.
- Easy to surface mount. Analyzer Enclosure has mounting holes
that are outside of the gasket seal. Mounting hole spacing is also
indicated on the back of the enclosure in both inches and centimeters.
- Available in both Right and Left handed versions. Left Handed
version swaps the position of the on/off switch and the
calibration knob, making it much easier for the left handed to use. Showing the south paws some respect...
- 4-5 year expected lifespan of sensor. Sensor has two year
warranty. Lower overall cost of ownership.
- 2 year limited warranty against workmanship and material defects.
- Includes Battery. Oxygen Analyzer ships fully assembled and ready
to use.
Proudly made in the USA.
|
Analyzer with External Sensor and Six Feet of
Cable. (Backlight On - Switch in Down Position)
|
|
Analyzer Easily Wall Mounts Next to your Nitrox
Sik.
|
|
Jack screws onto Oxygen Sensor, High Quality
Armored/Shielded Cable Resists Damage.
 |
|
Mounting Holes on Back of Enclosure make wall
Mounting Easy.
 |
The Rubber Duckie Designs Oxygen
analyzer is available for purchase for $350. Shipping anywhere within the United States
costs an additional $15. For shipping to other countries, please send us
an email with your address and we will provide you a quote for the most cost
effective shipping method (usually this is US Postal Service).
Call Derek at (808) 392-8252 or email at
Derek@RubberDuckieDesigns.com for more information.
| 
